Site en Français English Website Deutsch website

Do away with stacking

 

 

       By using RH hydraulic fittings you can do away with stacking because just one fitting can integrate several functions.

 

 

  •  Fewer fittings, less risk of leakage.

The objective of the RH concept is to reduce the number of fittings needed to create the hydraulic connections of machinery. The more fittings assembled the higher the risk of leakage.  Eliminating stacking and replacing it with just one fitting makes it possible to reduce leakage to a minimum.

  • By eliminating stacking, tightening torque can be respected.

Putting several fittings together complicates assembly. Tightening torques are therefore not necessarily respected. Assembling just one fitting considerably simplifies the task and makes it possible to respect recommended tightening torques.

  • Freeing up space in a more and more complex environment.

With the widespread use of variable displacement pumps fitted with hydraulic regulation, hydraulic connections become more complex. If we add the growing number of options to this same machinery then, hydraulic  connectivion becomes a real chore for the engineering department.

The objective of the RH concept is to reduce the number of fittings needed to create the hydraulic connections of machinery to a minimum. The fact of replacing 2,3 or 4 fittings by just one frees up valuable space in machinery environments which are more and more congested.

 

/

    /Stacking hydraulic fittings                                                     RH hydraulic fitting

                5 risk areas                                                             only 3 risk areas

 

Empilage raccord hydraulique - raccord RH                            

© Raccords
Hydrauliques

  • Address : ZA les moncellières 49123 Le Fresne sur Loire - FRANCE
  • Phone : +0033 2 41 39 08 33
  • Fax : +0033 2 41 77 89 67
Donec Nullam vel, lectus libero ut ut